Marley Advanced Lusa

445 x 249mm

18ᴼ * depending on climatic zones

41ᴼ * depending on climatic zones

73mm

380mm

200mm (nominal at lock mid shuffle position)

12,0 tiles/m² (net)

+ - 37,2kg/m²

2,70 lin.m/m²

38 x 38mm for rafters/supports not exceeding 760mm centres
38 x 50mm (batten fixed flat) for rafters/supports not exceeding 900mm centres
38 x 50mm (batten on edge) for rafters/supports not exceeding 1 000mm centres.

Note: Batten space estimations should be done on the job using the calculation method as per installation manual.

Note: Above 760mm the rafter spacing can be increased only with engineer-designed trusses and with 38 x 50mm batten of the correct grade. All structural timber must comply with S.A National Standards.

4,5mm x40mm Corrosion-resistant nails for fixing Std Tiles and battens in the structure

6,0mmx80mm or 6,0mmx120mm for fixing special ceramic accessories such as Over Eave Tiles/ Half Tiles/Etc.

372mm (nominal)

Additional Notes

Clay is a natural product, as a result possible colour, tonal and finish differences can be expected. We therefore recommend mixing tiles from different boxes and/or pallets to promote the best colour mix and overall finish.

The usage of Marley Advance Lusa ceramic and non ceramic accessories is essential to ensure ideal finishing results.

Please note the minimum recommended pitch for the Marley Advanced Lusa clay tiles, is defined in accordance with local climatic zones and wind exposed areas - non adherence to Marley Roofing's recommendations may result in compromised performance. Therefore, strictly follow Marley's installation guidelines as well as local safety and building regulations when assembling this product.

Marley Undertile Membrane or Radiant Barrier is recommended at all pitches in exposed and coastal areas.

For more information please contact Marley Technical Services.